Frigidaire FFEF3015LM, Use & Care Manual

15

SETTING OVEN CONTROLS

Your appliance has been factory calibrated and tested 

to ensure an accurate baking temperature. For the first 

few uses, follow your recipe times and temperature 

recommendations carefully. If you think the oven is 

cooking too hot or too cool for your recipe times, you can 

adjust the control so the oven cooks hotter or cooler than 

the temperature displayed.

To adjust oven temperature:

1.  Press  

bake

.

2.  Set the temperature to 550°F (287°C) by pressing and 

holding the 

.

3.   Within 2 seconds, press and hold 

bake

 until numeric 

digit(s) appear. Release 

bake

 keypad.

The display now 

indicates the amount of degrees offset between the 

original factory temperature setting and the current 

temperature setting. If the oven control has the 

original factory calibration, the display will read “0.”

4.  The temperature can now be adjusted up or down 

35°F (19°C), in 5°F increments by pressing and 

holding the 

 or 

.  Adjust until the desired 

amount of offset appears in the display. When 

lowering the oven temperature, a minus sign (-) will 

appear before the number to indicate that the oven 

will be cooler by the displayed amount of degrees.

5.  When you have made the desired adjustment, press  

clear off

 to go back to the time of day display. 

Adjusting the oven temperature

Oven temperature adjustments made will not affect the 

broil or self-cleaning feature temperatures.

If the display is set for Celsius, adjustments made will be 

in 1°C increments each press of the 

 or 

keys. 

DO NOT USE

 oven thermometers such as those found 

in grocery stores to check the temperature settings inside 

your oven. These oven thermometers may vary as much 

as 20 to 40 degrees from actual temperatures.

NOTES

To set the oven lockout feature

1.    Press 

clear off

 and hold for 3 seconds. “Loc” will 

appear in display, the “Door Locked” indicator light will 

flash and the motor driven door lock will begin to close 

automatically. 

Allow about 15 seconds

 for the oven 

door to lock. Once the oven door is locked, the current 

time of day will appear in the display.

2.  To cancel the Oven Lockout feature, press 

clear off

and hold for 3 seconds. The control will unlock the 

oven door and resume normal operation.

DO NOT open the oven door

 while the indicator light 

is flashing. Allow about 15 seconds for the oven door to 

lock. Once the oven door is locked, the current time of 

day will appear in the display.

If any control pad is pressed with the oven lockout 

feature active, “Loc” will appear in the display until the 

control pad is released.

NOTES

Setting oven lockout

The control can be programmed to lock the oven door and 

lockout the oven control pads.

Operating oven light

(some models)

The interior oven light will automatically turn ON when the 

oven door is opened. Press the oven light switch located 

on the upper left control panel to turn the interior oven 

light ON and OFF whenever the oven door is closed.

The interior oven light is located at the upper left rear 

wall of the oven interior and is covered with a glass 

shield held by a wire holder. The glass shield must be in 

place whenever the oven is in use. To change the interior 

oven light, see “Changing the oven light” in the 

Care & 

Cleaning

 section.

oven light switch