21
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
To remove oven door:
1. Open oven door completely (horizontal with floor - See
Fig. 1).
2. Pull the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door (See Fig. 2). A tool such as a small flat-
blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
5. With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (See Fig. 4).
To replace oven door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge arm over
the roller pins located on each side of the oven door
frame (See Fig. 4). The hook of the hinge arms must
be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - See
Fig. 1).
4. Push the door hinge locks up towards and into the
oven frame on both left and right oven door hinges
(See Fig. 2) to the locked position.
5. Close the oven door.
Special door care instructions - Most oven doors
contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are
fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
Removing and replacing the lift-off oven door
CAUTION
CARE & CLEANING
Oven door
hinge
locations
Fig. 3
Fig. 1
Fig. 4
roller
pin
hinge
arm
about
10°
hinge
oven
door
Fig. 2
LO
CK
