16
DOOR HANDLE INSTALLATION
(SOME MODELS)
IMPORTANT
To ensure proper installation of handle,
please review these instructions and il-
lustrations thoroughly prior to installing
the handle.
Additionally, before installing the door
handle, make sure the door swing is
correct. Your model will have either
a right-hand or left-hand door swing.
Follow
if necessary.
CAUTION
Wear gloves and use extreme CAUTION
when installing these handles. The round-
ed end of the handles may be sharp.
1. Remove handle from carton and any
other protective packaging.
2. Position freezer handle end caps over
upper and lower pre-installed shoul-
der bolts (A) that are fastened into
door, ensuring the holes for the set
screws are facing towards the hinge.
3. While holding handle firmly against
door, fasten upper and lower Allen set
screws (B) with supplied Allen wrench.
Freezer
Upper
End Cap
Door
Freezer
Lower
End Cap
Door