13
Assembly of the burner caps
Make sure that all of the surface burner caps and surface
burner grates are installed correctly and at the correct loca-
tions.
1.
Remove all packing material from the cooktop area.
2.
Make sure burner head and caps are properly placed
on the surface burners.
Important:
The burner head has a hole which fits over the
ignitor. Make sure the head fits snugly before placing the
burner caps.
Note:
Unpack the burner grates and position them on the
cooktop after the burner heads and caps are properly
installed.
On round-style burners, the burner cap lip (
fit snug into the center of the burner head and rest level.
Refer to
for correct and incorrect burner cap place-
ment.
Figure 2:
Proper burner cap placement
Once in place, you may check the fit by gently sliding the
burner cap from side to side (
) to be sure it is
centered and firmly seated.
Figure 3:
Gently move cap for proper placement
Figure 1:
Burner cap (A) burner head (B) ignitor (C)
orifice (D)
A
B
C
D
•
Do not allow spills, food, cleaning agents, or any
other material to enter the gas orifice holder opening.
•
Always keep the burner caps and burner heads in
place whenever the surface burners are in use.
•
Never place flammable items on the cooktop.
Please note that the burner cap should not move off the
center of the burner head when sliding from side to side.
•
Check and be sure that all oval-style burner caps
(some models) are correctly in place on oval burner
heads.
•
Do not use the surface burners without the burner
caps and heads properly installed. Improperly seated
burner caps and heads may prevent burners from
lighting or cause uneven flame and heating.
•
Missing pieces or improper installation may lead to
spills, burns, or damage to your range and cookware.
•
Never place flammable items on the cooktop.
CAUTION
CAUTION
BEFORE SETTING SURFACE CONTROLS