32
CARE AND CLEANING
Aluminum Foil and Utensils
Cleaning the sealed burners
To avoid possible burns, do not attempt cleaning before
turning off all surface burners and allowing them to cool.
Any additions, changes, or conversions required in order for
this appliance to satisfactorily meet the application needs
must be made by an authorized qualified Agency. Routinely
clean the cooktop. Wipe with a clean, damp cloth and wipe
dry to avoid scratches. Keeping the surface burner head
ports and slots clean will prevent improper ignition and an
uneven flame.
To clean recessed and contoured areas of cooktop:
•
If a spill occurs on or in the recessed or contoured
areas, blot up spill with an absorbent cloth.
•
Rinse with a clean, damp cloth and wipe dry.
•
Never cover any slots, holes, or passages in the oven
bottom or cover an entire oven rack with materials
such as aluminum foil. Aluminum foil linings may trap
heat, causing a fire hazard.
•
Protective Liners — Do not use aluminum foil to line
the oven bottom. Improper installation of these liners
may result in risk of electric shock or fire.
•
Aluminum foil - Use of aluminum foil on a hot cooktop
can damage the cooktop. Do not use thin aluminum
cooking utensils or allow aluminum foil to touch the
surface elements under any circumstances.
•
Aluminum utensils - The melting point of aluminum is
much lower than that of other metals. Care must be
taken when aluminum pots or pans are used on the
cooktop. If aluminum pans are allowed to boil dry
when using the cooktop, not only will the utensil be
damaged or destroyed, but it may fuse to, break, or
mark the ceramic glass surface, permanently
damaging the cooktop surface.
WARNING
IMPORTANT
•
To avoid possible burns do not attempt to operate the
surface burners without the burner caps.
•
Do not use spray oven cleaner on the cooktop.
CAUTION