Frigidaire FGF367CGSB, User Manual

15

Oven Cleaning

(continued)

To Start the Self-Clean Cycle

*

We recommend a 2 hour self-clean cycle for 

light soils

 and a 3 hour cycle for

average to heavy soils

 (to assure satisfactory results).

To Set the Controls for a Self-Clean Cycle:

1. Be sure the clock shows the correct time of day.

2. Push 

CLEAN

. "— — —" appears in the display.

3. Push the 

UP ARROW 

until "3:00" appears in the display for a 3 hour cycle, or

push the 

DOWN ARROW

 until "2:00" appears in the display for a 2 hour cycle.

4. As soon as the 

UP or DOWN ARROW

 is released, "CLn" appears in the display.

5. As soon as the controls are set, the motor driven lock will begin to close

automatically and the "LOCK" indicator light will flash. 

DO NOT

 open the

door while the light is flashing (it takes about 15 seconds for the lock to

close).

6. The "LOCK" light will glow until the cleaning cycle is completed or cancelled,

and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1. The time of day will appear in the display window and the "LOCK" light will

continue to glow.

2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has

gone out, the oven door can be opened.

 DO NOT

 force the oven door open. This can damage the

automatic door locking system. Use caution when opening the door after the

self-cleaning cycle is completed. The oven may still be VERY HOT.

 Use care when opening

the oven door after the self-cleaning

cycle. Stand to the side of the oven

when opening the door to allow hot air

or steam to escape.