background image

Contents

Product Registration ......................................................... 2

Versión en español ........................................................... 2

Version française .............................................................. 2

IMPORTANT SAFETY INSTRUCTIONS...............................3-4

Grounding Instructions .................................................... 5

Surface Unit Flame Size .................................................... 5

Proper Surface Burner Adjustments.................................. 5

Setting Surface Controls ................................................... 6

Setting Warmer Drawer Controls (if equipped) ................ 7

Before Setting Oven Controls ........................................... 8

Control Pad Functions ...................................................... 9

Setting Clock and Minute Timer ..................................... 10

Setting Oven Controls ...............................................11-13

Self-Cleaning .............................................................14-15

General Cleaning .......................................................16-19

Changing Cooktop and/or Oven Lights .......................... 19

Installing Center Grates .................................................. 20

Customizing Your Oven Performance ............................. 21

Avoid Service Checklist ..............................................22-23

Warranty......................................................................... 24

OWNER’S GUIDE

Sealed Surface Burners

Electronic Oven Control - ES III

Self Cleaning Oven Feature

READ AND SAVE THESE INSTRUCTIONS

GAS RANGE

This Owner's Guide contains general operating instructions for your range and feature

information for several models. Your range 

will not

 have all the described features.

316135914 (0101)

Summary of Contents for FGFS68CJTA

























Reviews: