25
SELF-CLEANING
Setting self-clean with start time
To set self-clean with delay start instructions:
1. Remove all items from the oven interior, cooktop,
storage drawer (some models) or warmer drawer
(some models), all oven racks from the oven and be
sure the oven door is completely closed.
2. Press the
keypad. The "
:
" in the time of day
display will flash.
3. Press and hold the
keypad to scroll to the time to
start the self-clean cycle. Release the keypad when
the desired start time is displayed.
4. Press the
keypad.
"
---
" appears in the display.
5. To start press the
or
keypad once. "
3:00
" will
appear in the display indicating that a 3 hour self-
clean time is set. To change to a shorter 2 hour self-
clean time press the
keypad once ("
2:00
"
will
appear in the display indicating a 2 hour clean time is
desired).
6. "
CLn
" will appear in the oven display during the clean
cycle and the "
door locked
" indicator light will
remain ON until the cleaning cycle is complete or
cancelled and the oven temperature has cooled.
NOTES
•
The maximum
start time
setting with the self-clean
feature is 11 hours & 59 minutes.
•
Check to be sure the oven is empty
before
setting a
self-clean cycle with a delayed start setting.
Immediately after setting self-clean with a
start time
the oven door will lock, however, the self-clean feature
will not start heating the oven for cleaning until
reaching the delay start time.
•
On models equipped with cooktop lockout the cooktop
will also lock.
You may add start time instructions to the self-clean
feature, which will automatically start clean at a later time.
IMPORTANT
To avoid possible burns use care when opening the
oven door after the self-clean cycle is finished.
Stand
to the side of the oven
when opening the oven door
to allow any hot air or steam to escape.
When the self-clean cycle ends:
•
The time of day will appear in the oven display and
the "clean" and "door locked" indicator lights will
continue to glow.
•
Once the oven has cooled down for about 1 hour and
the "door locked" light has turned off, the oven door
may be opened.
•
Wait until the oven is
completely cool
, then wipe
away any residue or powdered ash from the oven
interior using a clean damp cloth or paper towel.
Immediately after setting clean using start time
instructions
the oven door will start to lock
. Check
to be sure the oven is completely empty
before
setting clean with start time. Be aware that the clean
feature will not start heating the oven for cleaning
until the time of day reaches the set starting time
If clean was set and any items remain inside the oven,
you will need to remove them before clean begins the
heating portion of the cycle.
Press
cancel
to stop self-clean and wait for the oven
door to unlock. Once unlocked, remove any items from
the oven, close the oven door and set for self-clean
again.
To stop self-clean at any time press
keypad.
CAUTION
