Provide adequate clearances between the
cooker and adjacent combustible surfaces. These
dimensions must be met for safe use of your
cooker.
Allow 30” (76.2 cm) minimum clearance between
burners and bottom of unprotected wood or
metal cabinet, or allow a 24” (61 cm) minimum
when bottom of wood or metal cabinet is
protected by no less than 1/4” (6.4 mm) thick
flame-retardant millboard covered with no less
than No. 28 MSG sheet metal (.015” [.38 mm]
thick), .015” (.38 mm) thick stainless steel, .025”
(0.64 mm) aluminum or .020” (0.5 mm) copper.
Installation of a listed microwave oven or
cooking appliance over the hob shall conform
to the installation instructions packed with
that appliance.
For island installation, maintain 2-1/2” minimum
from cutout to back edge of countertop and
3” minimum from cutout to side edges of
countertop.
To cabinets
below hob
and at the
cooker back
Minimum to
cabinets on
either side
of the cooker
30”
30”
Minimum
15”
3”
Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge
of the cooker
side panel
forward from
cabinet
0”
To cabinets
below hob
and at the
cooker back
1/4”
3”
Minimum
clearance
to left
wall
0”
18”
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum
To cabinets
below
cooktop and
at the range
back
18"
1"
30"
30"
0"
30"
46 3/8"
28 3/4"
w/ handle
26 1/4"
w/o handle
10 7/8"
36 1/4 " ± 1/4
23
DIMENSIONS AND CLEARANCES
Summary of Contents for FNG576CFSSB
Page 30: ...NOTES 30 ...
Page 31: ...NOTES 31 ...