background image

10

SABBATH MODE

There are four possible conditions that will cause the alert tone to sound.    

High Temp Alert

If the temperature inside the cabinet exceeds 23°F (-5°C), the HIGH TEMP LED will illuminate, and 

after 1 hour, the HIGH TEMP Alarm will sound and the cabinet temperature is shown in the display. 

The LED and temperature alert will remain active until the cabinet temperature is below 23ºF (-5ºC).  
The audible alert can be turned off by pressing ALERT RESET key. 

°F

The Sabbath mode is a feature that disables portions of the refrigerator and its controls in 

accordance with observance of the weekly Sabbath and religious holidays within the Orthodox 

Jewish community.  
To initiate or exit Sabbath Mode, press and hold the CONTROL LOCK and TEMP MODE keys for 3 

seconds. Then “Sb” will be displayed on the control panel indicating that the unit is in Sabbath mode. 
In the Sabbath mode, the High Temp alarm is active for health reasons. If a high temperature 

alarm is activated during this time, for example due to a door left ajar, the alarm will sound 

for about 10 minutes. The alarm will then silence on its own and a “high temp” icon will be 

displayed on the control panel. The high temp icon will continue to display even if the door is 

closed until Sabbath mode is exited and the icon reset.

For further assistance, guidelines of proper usage and a complete list of models with the  

Sabbath feature, please visit the web at http:\\www.star-k.org.

NOTE:

 While in Sabbath mode, neither the lights nor the control panel will work until Sabbath 

mode has been deactivated.
The unit stays in Sabbath mode after a power failure recovery. It must be deactivated with the 

buttons on the control panel.

Door Ajar Alert

This alert will sound to alert you that the door has been open for 5 minutes or more. The DOOR 

AJAR LED will illuminate and the audible alert will sound until the door is closed.  
The audible alert can be turned off by pressing the ALERT RESET key or by closing the door. If 

the door is ajar for 15 minutes, the interior light will turn off. 

°F

HI-TEMP

ALERTS

NOTE:

 To stop the ice maker, lift the wire signal arm until it clicks and locks in the “up” or  

OFF position.

Summary of Contents for FPFU19F8RF






















Reviews: