background image

2

IMPORTANT SAFETY INSTRUCTIONS

Definitions

     This is the safety alert symbol.  It is 

used to alert you to potential personal injury 

hazards.  Obey all safety messages that follow 

this symbol to avoid possible injury or death.

 

Doors

 

 Handles are secure and tight

 

 Door seals completely to cabinet on  

    all sides

 

 Door is level across the top

Leveling

 

 Unit is level, side-to-side and tilted ¼”  

    (6 mm) front-to-back

 

 Kick plate is properly attached to appliance

 

 Cabinet is setting solid on all corners

Electrical Power

 

 House power turned on

 

 Unit is plugged in

Final Checks

 

 Shipping material removed

 

 Appliance temperatures set

 

 Registration card sent in

Installation Checklist

WARNING

Please read all instructions before using  

this appliance. 

DANGER

DANGER indicates an imminently hazardous 

situation which, if not avoided, will result in 

death or serious injury.

WARNING

WARNING indicates a potentially hazardous 

situation which, if not avoided, could result 

in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous 

situation which, if not avoided, may result in 

minor or moderate injury.

IMPORTANT

IMPORTANT indicates installation, operation 

or maintenance information which is 

important but not hazard-related.

WARNING

Child Safety

•  Destroy carton, plastic bags, and any exte-

rior wrapping material immediately after the 

unit is unpacked. Children should never use 

these items for play. Cartons covered with 

rugs, bedspreads, plastic sheets or stretch 

wrap may become airtight chambers and 

can quickly cause suffocation.

•  An empty, discarded icebox, refrigerator, 

or freezer is a very dangerous attraction  

to children.

•  Remove the door(s) of any appliance that 

is not in use, even if it is being discarded.

WARNING

For your safety

• 

Do not store or use gasoline or other flam

-

mable vapors and liquids in the vicinity of 

this or any other appliance. Read product 

labels for flammability and other warnings.

•  Do not operate the unit in the presence of 

explosive fumes.

•  Remove and discard any spacers used to 

secure the shelves during  shipping. Small 

objects are a choke hazard to children.

•  Remove all staples from the carton. 

Staples can cause severe cuts, and also 

destroy finishes if they come in contact 

with other appliances or furniture.

Summary of Contents for FPFU19F8RF






















Reviews: