Frigidaire FRBIFF701, User Manual

Location

Refer to the assembly instructions for

the installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

Positioning

Install the appliance in a dry, well ventilated

indoors where the ambient temperature

corresponds to the climate class indicated

on the rating plate of the appliance.

CLIMATE

CLASS

AMBIENT TEMPERATURE

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems might occur

for some types of models when

operating outside of that range. The

correct operation can only be

guaranteed within the specified

temperature range. If you have any

doubts regarding where to install the

appliance, please turn to the vendor,

to our customer service or to the

nearest Authorised Service Centre.

Electrical Connection

 CAUTION!

Any electrical work required to install

this appliance should be carried out by

a qualified electrician or competent

person.

 WARNING!

This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be

observed.

The wires in the mains lead are coloured in

accordance with the following code:

A

B

C

D

E

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals in your plug, proceed as follows:
1. Connect the wire coloured green and

yellow to the terminal marked either

with the letter “E“ or by the earth symbol

 or coloured green and yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter

“N“ or coloured black.

16

INSTALLATION