Installation
• Obey the installation instruction supplied
with the appliance.
• Remove all the Packaging items.
• Do not install or use a damaged
appliance.
• Before first time starting up, check the
appliance for any damage incurred
during transport.
• Never remove or damage stickers,
warning labels or nameplates attached
to the appliance.
Water Connection
• Make sure to use a new water bottle.
• Make sure the water bottle not faulty - no
leakage or holes.
• Make sure to install the bottle as in
Catalogue.
• Make sure to use the proper capacity
(≤20) litre for the water bottle.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power
supply. If not, contact our Authorised
Service Centre or an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
• The appliance have electrical switch in
the side of appliance see chapter
"TECHNICAL INFORMATION", which is
set to turn ON or OFF the water heating
system only.
4
SAFETY INSTRUCTIONS
