WARNING!
Depending on the maker and model of
the water bottle, there may be some
variation in size. Check, during
installation of the bottle, that it is well
supported and stable, and there is no
risk of falling.
WARNING!
Never turn the appliance upside down
or tilt it more than 45°.
Electrical installation
A short power-supply cord is provided to
reduce the risks resulting from becoming
entangled in or tripping over a longer cord
Connect the plug firmly, if the product is
connected to an adaptor plug or extension
cord, be sure it is not in an area where it
will be exposed to water. We do not
recommend the use of an extension cord or
adapter plug.
After placing the water dispenser, check if it
is not over the power cord.
WARNING!
Do not fasten, twist or tie the power
cord.
Do not try to fix it. If it is damaged,
request the visit of a professional
technician. If the power cord is
damaged, it should be replaced by the
service centre technician
Vertically insert the filled bottle into the
bottle support on the top of machine.
WARNING!
Don't plug the power cord or push the
heating or cooling switchs until water
runs out from the tap of hot water.
1. Insert the Plug to the socket.
Power lamp will be ON.
2. Switch on the cooling and/or heating
switches .
The heating/cooling lamp will be ON, which
indicates that the system is in the heating/
cooling process.
The heating/cooling lamp is turned OFF,
that means that the hot/cold water reached
it's optimum temperature and ready to use.
3. Slide Upward the child lock and press
hot water button on the same time to
get hot water from the tap.
4. Press cold water button to get cold
water.
1
7
8
2
3
4
5
6
1
Power lamp.
2
Heating lamp.
3
Cooling lamp.
4
Hot water button.
5
Child lock.
6
Hot water tap.
7
Cold water tap.
8
Cold water button.
This appliance should work under
environment of temp from
20
⁰C to
38
⁰C.
In case hot/cold water is not needed
for a long time, turn off the switches
and unplug the cord from the socket
accordingly to save power.
6
USAGE
