background image

  For your safety the information in

this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.

- Do not store or use gasoline or other flammable

vapors and liquid in the vicinity of this or any other
appliance.

- WHAT TO DO IF YOU SMELL GAS

· Do not try to light any appliance.
· Do not touch any electrical switch; do not use

any phone in your building.

· Clear the room, building or area of all

occupants.

· Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier's
instructions.

· If you cannot reach your gas supplier, call the

fire department.

Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.

Contents

Contents

Contents

Contents

Contents

SUBJECT

SUBJECT

SUBJECT

SUBJECT

SUBJECT

P

PP

P

PAGE

AGE

AGE

AGE

AGE

Pre-Installation Requirements

2

Electrical Requirements

2

Exhaust System Requirements

2-3

Gas Supply Requirements

3

Location of Your Dryer

4

Mobile Home Installation

5

Rough-In Dimensions

5-6

Unpacking

6

Reversing Door Swing

6

Electrical Installation

7

Grounding Requirements

7

Electrical Connections—3-wire

8

Electrical Connections—4-wire

8

Installation

9

Replacement Parts

9

Printed in U.S.A.

P/N 131751700 (9806)

Installation

Installation

Installation

Installation

Installation

Instructions

Instructions

Instructions

Instructions

Instructions

Gas & Electric

Gas & Electric

Gas & Electric

Gas & Electric

Gas & Electric

Dryer

Dryer

Dryer

Dryer

Dryer

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer

Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer
is installed cor

is installed cor

is installed cor

is installed cor

is installed corrrrrrectly and safely

ectly and safely

ectly and safely

ectly and safely

ectly and safely. Leave these instr

. Leave these instr

. Leave these instr

. Leave these instr

. Leave these instructions near the Dr

uctions near the Dr

uctions near the Dr

uctions near the Dr

uctions near the Dryer after installation for futur

yer after installation for futur

yer after installation for futur

yer after installation for futur

yer after installation for future r

e r

e r

e r

e refer

efer

efer

efer

eference.

ence.

ence.

ence.

ence.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the

National Electrical Code, ANSI/NFP

National Electrical Code, ANSI/NFP

National Electrical Code, ANSI/NFP

National Electrical Code, ANSI/NFP

National Electrical Code, ANSI/NFPA 70 or in Canada, CSA C22.1 Canadian Electrical Code Par

A 70 or in Canada, CSA C22.1 Canadian Electrical Code Par

A 70 or in Canada, CSA C22.1 Canadian Electrical Code Par

A 70 or in Canada, CSA C22.1 Canadian Electrical Code Par

A 70 or in Canada, CSA C22.1 Canadian Electrical Code Part 1.

t 1.

t 1.

t 1.

t 1.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the

 The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the

National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.

NOTE:

NOTE:

NOTE:

NOTE:

NOTE: The Dr

 The Dr

 The Dr

 The Dr

 The Dryer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only

yer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only

yer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only

yer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only

yer is designed under ANSI Z 21.5.1  or ANSI/UL 2158 - CAN/CSA C22.2 (latest editions) for HOME USE only.....

This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

This Dryer is not recommended for commercial applications such as restaurants or beauty salons, etc.

Summary of Contents for GLER642AS3










Reviews: