21
SETTING OVEN CONTROLS
Setting the Clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash
12:00
. It is recommended to always set the clock
for the correct time of day before using the appliance.
To set the clock:
1.
Press
Set Clock
once (do not hold clock key down).
2.
Within 5 seconds, press and hold
or
until
the correct time of day appears in the display.
Temperature display (Fahrenheit/Celsius)
The electronic oven control is set to operate in Fahrenheit
(°F) at the factory. The oven may be programmed for any
temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to Celsius (°C) or from °C to
°F:
1. Press
Broil
.
— —
appears in the display.
2. Press and hold
until
HI
appears in the display.
3. Press and hold
Broil
until
°F
or
°C
appears in the display.
4. Press
or
to change °F to °C or °C to °F. To
accept the change, wait 6 seconds.
Continuous bake setting or 12-hour energy saving
feature
The oven control has a built-in 12-hour energy saving
feature that will shut off the oven if the oven is left on for
more than 12 hours. The oven control can be programmed
to override this feature for continuous baking.
To change the continuous bake setting:
1.
Press and hold
Timer on-off
for 6 seconds until a tone
sounds.
— — hr
will appear in the display for contin-
uous cooking. The current time of day will return to the
display.
2.
To cancel the continuous bake setting, press
Timer on-
off
and hold for 6 seconds until a tone sounds.
12 hr
will appear in display indicating that the control has
returned to the 12-hour energy saving feature.
Setting a silent control panel
When selecting a function, an audible tone is heard each
time a key is pressed. If desired, the control can be
programmed for silent operation.
To set the controls for silent operation:
1.
Press and hold
Start Time
for 6 seconds. The control
will beep once and release the key.
2.
The controls are now set for silent operation.
To return to non-silent operation:
1.
Press and hold
Start Time
again for 6 seconds until the
control beeps once and release the key.
2.
The control is now set for audible operation.
The clock cannot be changed when the oven is set for
cooking or self clean is active.
NOTE
Changing to continuous bake or 12 hour mode does not
change how the cooktop controls operate.
NOTE
