background image

Installation Instructions 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

Installation 
Instructions

Built-in Trim Kit

MWTK(P)27K and MWTK(P)30K

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

BEFORE YOU BEGIN 

 

 

IMPORTANT 

– Save these instructions 

for local inspector's use. 

 

IMPORTANT 

– Observe all governing 

codes and coordinates. 

 

Note to Installer 

– Be sure to leave 

these instructions with the Consumer. 

 

Note to Consumer 

– Keep these 

instructions for future reference. 

 

Skill level 

- Installation of this appliance 

requires basic mechanical and electrical 
skills 

Read these instructions completely and carefully. 
 

 

Proper installation is the responsibility of the 
installer. 

 

Product failure due to improper installation is 
not covered under the Warranty. 

 

Unplug the microwave oven before 
attempting installation of this kit. 

 

Because the kit includes metal parts, caution 
should be used in handling and installation to 
avoid the possibility of injury. 

 

Do not remove permanently affixed labels, 
warnings, or plates from the product. This 
may void the warranty. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

IMPORTANT - PLEASE READ 
AND FOLLOW 

 

THIS BUILT-IN KIT IS DESIGNED FOR USE 
ONLY WITH ELECTROLUX MICROWAVE 
OVENS SPECIFYING BUILT-IN KIT 

 
MWTK(P)27K OR MWTK(P)30K ON THE RATING 
LABEL ON THE LEFT SIDE WALL OF THE 
MICROWAVE OVEN CAVITY. 

 

FOR YOUR SAFETY: 

 

 

WARNING

 

– Before beginning the installation, 

switch power off at service panel and lock the 
service disconnecting means to prevent power from 
being switched on accidentally. When the service 
disconnecting means cannot be locked, securely 
fasten a prominent warning device, such as a tag, to 
the service panel.

 

QUESTIONS? 

For customers in the United States call: 1-800-944-9044

For customers in Canada call: 1-800-265-8352 (English)

1-800-668-4606 ext.8199 (French) 

Visit our Website at: 

www.frigidaire.com 

READ CAREFULLY. 

KEEP THESE INSTRUCTIONS.

 

PN316495084       
SEPT 2009            

Summary of Contents for MWTK(P)27K













Reviews: