ENG
10
ICM2000 [R290] & Slim HC are equipped with HC refrigerant, and
have been tested and proven to be safe according to related
standards.
All necessary actions for safe usage & maintenance of this
appliance are described in this manual and need to be followed
carefully.
This appliance must be installed only by a suitably qualified
person.
3. Installation & operation
Failure to comply with the instructions may result in high-energy
consumption, poor performance of the unit and void warranty.
Keep all ventilation openings in the appliance enclosure or in
the built-in structure clear of obstruction.
Do not use mechanical devices or means other than those
recommended by the manufacturer to accelerate the defrosting
process.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartments of the appliance, unless recommended by the
manufacturer.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service provider or similarly qualified persons
in order to avoid a hazard.
Do not place the merchandiser:
in direct sunlight or near heat sources (radiators, stoves & other
heating equipment)
outdoors, without proper protection from rain, moisture and other
atmospheric elements
in weather conditions for which it is not certified
in extreme environmental conditions (i.e. extensive exposure to
saline humidity, areas with risk of water accumulation)
on a surface with an angle more than 5
◦
3.1 Installation instructions
a.
After unpacking, check the cabinet for any damage caused during transportation. In the event of
damage, please contact the forwarding company.