ENG
14
FAULT
POSSIBLE REASONS
HANDLING
(this type of repair should be
performed by an authorised
technician).
Leakage in the cooling system.
Repair the leakage (this type of repair
should be performed by an authorised
technician).
The ICM sometimes
makes noise.
For this particular ice cold
merchandiser, a powerful
mechanism is needed and
consequently a certain amount of
noise cannot be avoided.
Ice Cold Merchandisers are of
dynamic type, according to the
specifications that the company is
offering.
Intense metallic noise.
Call a Service technician.
Inclined or curved floor.
Level the ICM properly by adjusting its
feet. Placing a spirit level on the top of
the ICM will assist you in leveling it.
FAULT
POSSIBLE REASONS
HANDLING
There is water on the
floor.
The drainage hole for the
condensate water is blocked.
Unblock the drainage hole.
There is a leakage in the tray.
Call a Service technician.
The lights d
on’t work.
The fluorescent tubes or ballast or
starter are out of order.
Call a Service technician.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:
Type of ICM
Serial number of the ICM
Brief description of the problem / observation
6. First aid
In case of accident, it is recommended:
ACCIDENT
IMMEDIATE ACTION
Inhalation of refrigerant
Take deep breaths of clean air. If irritation persists, contact a
doctor.
Contact with eyes
Wash your eyes thoroughly with plenty of water for at least 15
minutes and then consult a doctor.
Contact with skin
Wash immediately with water.