ENG
7
FAULT
POSSIBLE REASONS
HANDLING
There is water on the
floor.
The drainage hole for the
condensate water is blocked.
Unblock the drainage hole.
There is a leakage in the tray.
Call a service technician.
The lights don’t
work.
The fluorescent tubes or ballast or
starter are out of order.
Call a service technician.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:
Type of ICM
Serial number of the ICM
Brief description of the problem / observation
6. First aid
In case of accident, it is recommended:
ACCIDENT
IMMEDIATE ACTION
Inhalation of refrigerant
Take deep breaths of clean air. If irritation persists, contact a
doctor.
Contact with eyes
Wash your eyes thoroughly with plenty of water for at least 15 minutes
and then consult a doctor.
Contact with skin
Wash immediately with water.
7. Disposal of the unit
For detailed information regarding the recycling of this product, please contact your local city office,
your waste disposal service or the manufacturer through its service agent. By ensuring this product is
disposed of properly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise incur by this product’s inappropriate disposal.
8. Recycling information
1.
Based on the objectives of environmental policy according to the European Community (EC)
directives for Waste Electrical and Electronic Equipment (WEEE)
3
which aim to preserve,
protect and improve the quality of the environment, protect human health and utilize natural
resources prudently and rationally. As an end user, you are kindly requested to do the following:
3
References
Waste Electrical and Electronic Equipment (WEEE) European Community (EC) Directive Nr. 2002/96/EC
