background image

 

 

FRIGOMAR ENG - CU50VFD-CU70VFD 20190108.doc81218  Page 20 of 24 
 

6.0 WARRANTY 

 

6.1 LIMITED WARRANTY :    

 
The warranty is given to the purchasers who buy Frigomar-manufactured products and components 
for their own use.  
Frigomar guarantees all these products to be free from defects in materials or workmanship. 
Warranty is limited in term of duration as specified in the following sections. 
 
This Limited Warranty is made in place of all other express warranties, obligations, or liabilities on the 
part of Frigomar. In those instances, in which Frigomar chooses to make a cash refund of the original 
purchase price, such refund shall affect the cancellation of the contract of sale without reservation 
of rights on the part of the owner. Such refund shall constitute full and final satisfaction of all claims 
which the owner has or may have against Frigomar resulting from any actual or alleged breach of 
warranty, either express or implied.  
Frigomar disclaims any liability for either incidental or consequential damages. This includes any 
damage to another product or products resulting from such a defect. Any implied warranties of 
merchantability, satisfactory quality or fitness for any purpose is limited to the duration of this limited 
warranty.  
 
Frigomar does not authorize the dealer or any other person to assume for Frigomar any liability in 
connection with the warranty, or any liability or expense incurred in the replacement or repair of its 
products other than those expressly authorized by Frigomar. Frigomar shall not be responsible for any 
liability or expense except as is specifically authorized in the following sections. 
Frigomar reserves the right to improve or modify its products without notice, through changes in 
design or material without being obligated to incorporate such changes in products of prior 
manufacture.  
 
 

6.2 WARRANTY DURATION :    

 
The Frigomar product’s Warranty Coverage Period begins from the date of possession of the boat by 
the original owner (if OEM installed) or from the date of installation (if the Frigomar product is installed 
by a dealer). However, the Warranty Coverage Period will not exceed 3 years from date of 
manufacture. The Warranty is transferable and will carry any remaining Warranty Coverage Period. 
The Warranty Coverage Period does not restart following any repair or replacement of the Frigomar 
product.  
All Frigomar products bear a data plate showing the product model and serial numbers. The serial 
number is date-coded. To determine whether any Frigomar product is covered under this Warranty, 
proceed as follows:  
Determine the manufacture date of the Frigomar product from the serial number found on the data 
plate. If you are not familiar with the date code, email or call Frigomar Customer Service in order to 
obtain the Frigomar products manufacture date. 
In some cases, there might be a consistent delay between the date a Frigomar product is 
manufactured and the date it is put in service. For proof of the date that the Frigomar product was 
put in service, Frigomar will require a copy of the bill of sale from the Frigomar product installer or a 
copy of the bill of sale showing the date of delivery from the new boat dealer to the original owner. 
Therefore, owner should retain a copy of the dated bill of sale as evidence of the date of purchase 
or date of delivery.  
 
- Chiller, self-contained units and fan coils: If any part of the Frigomar unit fails due to a 
manufacturing defect within 24 months from the date of possession of the boat by the first owner, 
Frigomar will supply without charge the required replacement part. The service labour will be at 
Frigomar charge within 12 months from the data of possession of the boat by the first owner, as long 
as the conditions specified in Section III are fulfilled. 
 
-Chiller units equipped with 70/30 CuNi condenser:  5 years warranty with first year parts and labour, 
second year parts only, third through fifth years, parts-only warranty against erosion/corrosion 

Summary of Contents for CU50VFD

























Reviews: