Livøvej 22 - 8800 Viborg - Tlf. 86 61 34 11 - mail@vibocold.dk - www.vibocold.dk
7
Display Freezer
CIF
042014
7
Important safety instructions
1.
To obtain full use of the cabinet, we recommend reading this instruction manual.
2.
It is the user’s responsibility to operate the appliance in accordance with the instructions
given.
3.
Contact your dealer immediately in case of any malfunctions.
4.
Place the cabinet in a dry and ventilated place.
5.
Keep the cabinet away from strongly heat-emitting sources and do not expose it to direct
sunlight.
6.
Always keep in mind that all electrical devices are sources of potential danger.
7.
Do not store inflammable material such as thinner, gasoline etc. in the cabinet.
8.
We declare that no asbestos nor any CFC are used in the construction.
9.
The oil in the compressor does not contain PCB.
Unpacking and installation
Carefully examine the cabinet for shipping damage before discarding the packing material. If any
damage is found, contact the delivery carrier immediately and have his agent prepare an inspection
report for the purpose of registering a claim.
THIS IS YOUR RESPONSIBILITY.
Electrical connecting
The cabinet operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observed. The
cabinet plug and wall socket should then give correct earthing. If in doubt, contact your local
supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-Amp or 3-pin 15-
Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.
UK
