In Standby mode, press Target Heart-Rate key and
will light up, along with
along sound for 1s.
AGE value is flashing, press UP and DOWN to preset your Age (Figure 45). Press ENTER
to confirm along with buzzer beeps 1s and and HEART RATE last lighting up.
When start workout, MAX HR lights up, 65% & 85% Heart rate will switch to display.
TIME/ DISTANCE/ CALORIES/ WATTS/ SPEED/ RPM will calculate workout value
(Figure 46).
When Heart Rate goes below to 65%, & & value will flash. And buzzer sounds in
every 10s until user HR achieve above 65% (Figure 47).
When Heart Rate exceeds to 85%,
&
& value will flash. And buzzer sounds in
every 10s until user HR goes below 85% (Figure 48).
When Heart Rate goes between 65% ~ 85%, only will flash (Figure 49).
Target HR mode:
2
3
4
5
6
7
No signal input for 30s, buzzer sounds 1 short beep and enter to Wake-up mode.
Press START button once enter into PAUSE mode,Buzzer will sound for 0.5s per second
within 30s. All values are displaying on LCD and flashing in every 2s. If continue to
stop training for 5 minutes, buzzer sounds 2s and enter to Wake-up mode. Press
START to resume workout.
Press STOP again or end up training in 15s, TIME will display total workout time;
DISTANCE will display total workout distance; CALORIES will display total
consumption during workout; WATT, SPEED and RPM will switch to display AVG. &
MAX. PULSE window will switch to display 65%, 85% MAX (Figure 21~23) each 5s.
With pulse signal input, PULSE window will display user actual pulse. Pulse window
displays nothing if no pulse signal input (Figure 19~20).
Press any PROGRAM key then perform the program accordingly.
8
9
10
11
1
65%
85%
Figure 47
Figure 48
Figure 49
AGE
