21
7.
After frying pull the basket up and suspend it on the hook.
8.
Bring the thermostat knob back to the position of the lowest temperature and
disconnect the plug. Allow complete cooling before emptying and cleaning the deep
fryer. Only fold in the basket handle when the oil has completely cooled off. Put the
cord into the cord case.
IV.
MAINTENANCE
1.
Remove the plug before disassembling the deep fryer. First remove the basket,
then the control panel with heating element and the bowl. The microswitch
automatically switches off the deep fryer when removing the control panel.
2.
-NEVER immerse the control panel in water or any other liquid. Only clean it with
a damp cloth.
-Stainless steel housing, stainless steel lid and stainless steel bowl can be cleaned
in the dishwasher or in hot water with detergent. Nevertheless, we recommend to
clean the stainless steel parts in hot water with detergent, considering the
aggressive detergents used in the dishwasher may affect the shine of the stainless
steel.
-Clean the basket in hot water with detergent with a washing-up brush. NEVER let
the basket soak in the water to avoid rusting.
3.
If you want to clean your deep fryer quickly, easily and safely, we advise you to
use the FRITEL cleaner for fryers.Thanks to the FRITEL cleaner for fryers, this will
all be done in no time. Fill the bowl of the deep fryer with warm water at + 40°C
and add about 10 caps of FRITEL cleaner for fryers. The product must soak in for
+/- 20 minutes, then empty the bowl. Rinse thoroughly and wipe with a soft
towel.The FRITEL cleaner for fryers contains natural enzymes. So it’s environment-
friendly, biodegradable and non-toxic. The FRITEL cleaner for fryers can be applied
to all materials like stainless steel, synthetic, enamel, etc.
V.
TROUBLE SHOOTING
Do not use the appliance, when damaged. First go through the following check-list:
1.The fuse blows :
Let the deep fryer cool off first, then press the Reset button. The deep
fryer is ready to be used again.
2.The deep fryer does not heat up :
The safety thermostat is interrupted: Press the Reset button
The safety switch is interrupted: The control panel is not mounted
correctly onto the sliders, the bowl is mounted falsely, or one of the
sliders has broken off. In the first two cases : mount the fryer correctly. In
the last case : note the data in the cord storage, then go to your sales
point.
3.The oil gives off smoke or boils over :
The oil/fat is old or degraded: Replace the oil/fat
The chosen temperature is too high : Choose a lower temperature
The fried food contains too much water or contains too much redundant
ice.
4.The fried food is too greasy :
The oil/fat is old and degraded: Replace the oil/fat
Downloaded from www.vandenborre.be
