FRITEL Turbo SF® fryer: The only one with heating element on 2 levels
21
Clarification on pre-frying French fries: We advise to pre-fry fresh fries at 150°C. ATTENTION: new harvest
potatoes contain more water, so in this case we recommend to pre-fry at 170°C. But if you use older potatoes,
they will already get brown/colored during the first baking cycle.
5.
MAINTENANCE
▪
Remove the plug and let the deep fryer completely cool off before disassembling it. First remove the basket, then
the control panel with heating element and the bowl.
▪
NEVER
immerse the control panel in water or any other liquid. Only clean it with a damp cloth.
▪
Stainless steel housing, stainless steel lid and stainless steel bowl
can be cleaned in the dishwasher or in hot
water with detergent. Nevertheless, we recommend cleaning the stainless steel parts in hot water with
detergent, considering the aggressive detergents used in the dishwasher may affect the shine of the stainless
steel.
▪
Synthetic housing and synthetic lid
can both be cleaned in the dishwasher or in hot water with detergent.
▪
Important: the
painted metal housing and painted metal lid
need to be cleaned in hot water with detergent. In
the dishwasher a discoloration may occur due to the aggressive chemicals used in the cleaning products.
▪
Important: the
filter lid
needs to be cleaned in hot water with detergent. In the dishwasher a degradation of the
filter may occur due to the aggressive chemicals used in the cleaning products.
▪
NEVER
clean the
basket
in the dishwasher, the aggressive detergents could cause rust. Clean it in hot water with
detergent with a washing-up brush.
NEVER
let the basket soak in the water to avoid rusting.
▪
If you want to clean your deep fryer quickly, easily and safely, we advise you to use the FRITEL cleaner for fryers.
Fill the bowl of the deep fryer with warm water at + 40°C and add about 10 caps of FRITEL cleaner for fryers. The
product must soak in for +/- 20 minutes, then empty the bowl.
Rinse thoroughly and wipe with a soft towel. The FRITEL cleaner for fryers contains natural enzymes. So,
it’s
environment-friendly, biodegradable and non-toxic. The FRITEL cleaner for fryers can be applied to all materials
like stainless steel, synthetic, enamel, etc.
6.
TROUBLE SHOOTING
Do not use the appliance, when damaged. First go through the following check-list:
The fryer doesn
’
t work
The bowl is placed backwards in the housing so that the control panel cannot be
placed correcty on the sliders => Solution: The basket hook in the bowl must be at
the front of the fryer (opposite to control panel)
The control panes is not correctly placed on the sliders => solution: after cleaning,
place the control panel correcty on the sliders. You will hear a clic when it has been
cone correctly.
The fryer is stored in a cold place. If you do so, it can be switched off by the safety
thermostat => solution: before using the fryer, place it at room temperature for
about an hour, so that the fryer can get at room temperature.
Check is the reset button has come out. In that case you will see a red button at the
backside of the control panel => Press the reset button back inside (afther the fryer
has cooled off) and in most cases the fryer will work again.
The resistance has a blue-grey color => the fryer was probably heated without oil, or
with too little oil, or the solid fat was not melted correctly according to the
instructions mentioned in the user manual. In some cases this problem can be solved
