FRITZ!WLAN USB Stick AC 860
22
Wireless LAN Connection Is Not Established
The Computer Does Not Detect FRITZ!WLAN USB Stick
The computer does not automatically detect the FRITZ!WLAN
USB Stick when it is inserted. The device driver installation
does not start.
The FRITZ!WLAN USB Stick is not inserted correctly into the
USB port or the chip set drivers of the computer are out of
date.
Remove the FRITZ!WLAN USB Stick from your computer and
then insert it again into a USB port of the computer. Install
the latest chip set drivers. See the documentation for your
mainboard to find out which drivers your computer requires.
The latest chip set drivers are available at
,
,
6.2
Wireless LAN Connection Is Not Established
Checking the Settings
Could not register at the wireless access point.
When the wireless LAN connection was established the wrong
wireless access point was selected, or an incorrect network
key was entered.
Make sure you selected the right wireless access point. For a
FRITZ!Box the preconfigured name of the radio network (SSID)
always begins with “FRITZ!Box”.
Make sure that you entered the correct network key. Pay spe-
cial attention to capitalization. On a FRITZ!Box the preconfig-
ured network key is found on the base of the device.
Cause
Help
Cause
Help