Reducing the Radiation of DECT Emissions
Overview
With the following settings you can reduce the radiation of DECT emis-
sions:
• Reduce DECT field strength: Enable this setting only if you use all
DECT devices in the vicinity of the FRITZ!Box. Reducing the field
strength also reduces the range of the DECT radio network.
• DECT Eco: When DECT Eco is enabled, the FRITZ!Box switches off
the DECT radio network as soon as all cordless telephones are in
standby mode. When a call arrives or you press a key on a cordless
telephone, the radio network is switched back on.
You can enable these settings individually or at the same time.
Requirements
• All registered cordless telephones support DECT Eco: Under “Tele-
phony / DECT / Monitor” in the FRITZ!Box user interface, “DECT Eco
supported” is displayed for each telephone.
• The following devices are not registered with the FRITZ!Box:
FRITZ!DECT devices with an outlet switch, FRITZ!DECT Repeater,
another FRITZ!Box in DECT repeater mode.
Instructions: Reducing DECT Transmission Power
1.
Open the user interface;
2.
Select “Telephony / DECT / Base Station”.
3.
Enable the “Reduce DECT field strength” checkbox.
4.
Click on “Apply”.
Instructions: Enabling DECT Eco
1.
Open the user interface;
2.
Select “Telephony / DECT / Base Station”.
FRITZ!Box 7530 AX
114
User Interface: Telephony Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
