Enabling DECT Eco
FRITZ!Box 7560
109
16.4
Enabling DECT Eco
DECT Eco allows the DECT radio network to be switched off
during standby operation.
How Does DECT Eco Work?
When all registered cordless telephones are in standby oper-
ation, the DECT radio network of the FRITZ!Box and the tele-
phones is switched off. When a call arrives or you press a key
on a cordless telephone, the DECT radio network is switched
back on.
A telephone is on standby when you are not making any calls,
not using any other features, and not pressing any buttons.
Requirements
•
In the user interface (see
), the option “DECT Eco
supported” must be displayed for each cordless tele-
phone under “DECT / DECT Monitor”.
•
The FRITZ!Box must be configured as a DECT base sta-
tion: The setting “DECT enabled” must be enabled under
“DECT / Base Station” in the user interface.
•
The following devices may
not be registered with the
FRITZ!Box
: DECT-ULE devices (for instance FRITZ!DECT),
FRITZ!DECT Repeater, FRITZ!Box in DECT repeater mode.
Enabling DECT Eco in the FRITZ!Box
1.
Open the FRITZ!Box user interface.
2.
Select the “DECT / Base Station” menu.
3.
Enable the “DECT Eco” option and define when DECT Eco
should be active.
4.
Click the “Apply” button to save the settings.
5.
Register all of the cordless telephones on the FRITZ!Box
again.
