FRITZ!Powerline 1000E
30
Using FRITZ!Powerline in a Two-phase Circuit
13.3
Using FRITZ!Powerline in a Two-phase Circuit
You can also use FRITZ!Powerline 1000E in a power grid with
two phases. However, in a two-phase circuit FRITZ!Powerline
can only pair two wires into a single pair. This means that no
gigabit data rates are possible.
13.4
Using Slower Adapters in the FRITZ!Powerline Network
In the FRITZ!Powerline 1000E network you can also use pow-
erline adapters with data rates lower than those of
FRITZ!Powerline 1000E, for instance, adapters with
500 Mbit/s.
Every data exchange with the slower powerline adapter then
takes place at the lower data rate.