Loading Factory Settings
FRITZ!Powerline 1000E
27
11
Loading Factory Settings
FRITZ!Powerline adapters are delivered with certain factory settings
configured, for instance with a preset network password and default
settings for the LEDs.
The factory settings can be restored in two ways:
•
with the button
•
with the FRITZ!Powerline software
11.1
Restoring Factory Settings Using the Button
1.
Plug a FRITZ!Powerline adapter into an outlet.
2.
Press the “Powerline • Security” button on and hold it
down for 10 to 15 seconds.
When you release the button, all LEDs turn off briefly and
FRITZ!Powerline restarts.
After the restart the “Power” LED is lit up.
The FRITZ!Powerline is reset to its factory settings.
11.2
Loading the Factory Settings with the “FRITZ!Powerline”
Software
1.
Plug a FRITZ!Powerline adapter into an outlet.
2.
Use a LAN cable to connect the FRITZ!Powerline adapter
to a computer on which the “FRITZ!Powerline” software
is installed.
3.
Start the “FRITZ!Powerline” program and double-click
the icon of the FRITZ!Powerline adapter.
The “FRITZ!Powerline Device Profile” window opens.
4.
Click “Reset” and then “OK”.
All LEDs turn off briefly and FRITZ!Powerline restarts. The re-
start is complete as soon as the “Power” LED lights up.