FRIULINOX ALI GROUP S.R.L. A SOCIO UNICO
36
Translation of the original instructions
Via Treviso 4, 33083 Taiedo di Chions (PN) - Italy
Service
M
an
u
al
8.2.
Temperature probe replacement
8.2.1.
Core probe replacement
1.
Loosen the cable gland ring nut on the internal vertex
of the door.
2.
Loosen the cable gland sealing nut.
3.
Extract the probe cable a little and cut it at the height
shown in the photo.
4.
Joint the cut cable with that of the new probe to use it
as a guide.
5.
Remove the two screws on the right side of the handle
and the two screws on the left side of the handle.
6.
Remove the screws at the bottom of the handle
