MAINTENANCE
Trouble Shooting
Empty the water container
1.Hold and pull out the water container with two hands.
2.Tilt the water container, pour out the condensate water.
3.Insert the water container.
•
Empty the water container after each use, the programme will be paused and
the “ ” icon will light if the water container is full during the drying process.
After the container is emptyed, the dryer can be restarted by pressing
【
Start/Pause
】
button.
•
Do not drink the condensate water.
•
Do not use the dryer without the water container.
Warning!
！
“
”
E30
“
”
E32
“
”
E33
Alarm Problem
Alarm Reason
Release
Heating problem
Humidity sensor error
Temprature sensor error
P lease contact your
local service
center
if the problem persists.
MAINTENANCE
• Only authorised technicans can carry out repairs.
• Before you call service,
fault yourself or if you have followed the user instructions.
• A technician will charge you for advice, even during the warranty period.
please check if you have dealt with the
If you cannot deal with the fault by yourself and need help:
• Press the
【
On/Off
】
button
.
• Pull out
the mains plug and call the service
.
Warning!
！
Warning!
！
• Clean lint filter and
.
• Empty container.
• Check drain hose.
• Dryer installation place is too restricted.
• Clean the moisture sensors.
• Keep the Air inlet clean
.
• Use higher drying intensity level programme or
time programme.
heat exchanger
• “ ”/ “FUL”is lighting
•“ ”is
ing
light
Problem
Solution
•Display does not
on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the
【
On/Off
】
button.
• Empty water container.
• If the light is still on, please call the service.
• Clean heat exchanger.
• Clear lint filter.
•Dryer does not start
•
the door has closed.
• Check the programme has set.
• Check the start button has selected.
Check the
•Degree of dryness was
reached or drying time too
long
not
KOBLENZ8600TK-3
E
N
03
/20
20
Page
2
1 of 24
KOBLENZ8600TK-3
E
N
03
/20
20
Page 2
0
of 24
