122
Power
Specification
Base station/console
5V DC Adapter (included)
Indoor sensor
2 x AA 1.5 Alkaline batteries (not included)
Outdoor sensor
Solar panel (built-in)
Outdoor sensor (backup)
2 x AA 1.5V LR6 Alkaline (not included), or
2 x AA 1.5V Lithium battery (not included)
Table: Power specification
The primary power source for the outdoor sensor is the solar panel. When available solar power
(light over recent period) is insufficient, the batteries will be used. In outdoor climates that
frequently have sustained temperatures below 0°C (or 32°F) the use of Lithium batteries is
strongly suggested as these are performing better than Alkaline batteries under such
circumstances.
9. Gerneral safety insructions
Danger of asphyxiation:
Keep all packaging materials (plastic bags, rubber bands, etc.) away from children. There is a
danger of suffocation!
Danger of burns:
Caution! Leaking / leaking battery acid can lead to burns! Avoid contact of battery acid with
eyes, mucous membranes and skin. In case of contact, rinse the affected areas immediately
with clear water and consult a doctor.
Risk of electric shock:
Children must not be unattended with the device, because the device contains electronic parts
which are operated by means of a power source. The device may only be used as described in
the instructions. If not, there is a risk of electric shock.
Danger of fire & explosion:
Use only recommended batteries. Never short-circuit the unit or batteries. Never throw the
device or batteries into a fire! Overheating and improper handling may result in short circuits
which can cause fires and explosions.
Important:
If there is a defect, contact your dealer immediately. Never disassemble the device! The dealer
will contact the service department. Never expose the device to water! Protect the device from
vibrations. Only use recommended batteries. Never mix batteries - Always replace empty
