38
- Press the
WIND/+
and
PRESSURE/-
key to adjust values.
- Press the
SET
key to confirm & move to the next item.
- Press the
ALARM
key to reset any adjusted value.
- Press the
LIGHT /SNOOZE
key at any time to exit.
Calibration Order:
1) Indoor temperature offset calibrated (range +/-5˚C, default: 0
degrees)
2) Indoor humidity offset calibrated (range +/-10%)
3) Outdoor temperature offset calibrated (range +/-5˚C, default: 0
degrees)
4) Outdoor humidity offset calibrated (range +/-10%)
5) Absolute pressure offset calibrated (range +/-50hpa)
6) Wind direction offset calibrated (adjust by degree)
7) Wind speed factor adjust, default 100% (range 50% to 150%)
8) Rain factor adjust, default 100% (range 50% to 150%)
6.8 Other Features
6.8.1 Factory Reset/Clear Memory
To restore the console to factory default, perform the following steps:
1. Remove the power from the console by removing the batteries
and disconnecting the AC adapter.
Summary of Contents for WH3000SE
