24
2.2 UNIT SETTING
After entering setting mode, press
”
”
key to enter
“
UNIT SETTING
”
display. Then press
” ”
key to to enter the following sub-setting:
1) Light unit select (lux, fc, w/m2)
2) Temperature unit select (C, F)
3) Pressure unit select (hpa, inhg, mmhg)
4) Wind speed unit select (km/h, mph, knots, m/s, bft)
5) Rainfall unit select (mm, inch)
2.3 RECORD SAVE INTERVAL
Press
”
”
key the twice time to enter
“
RECORD SAVE INTERVAL
”
display. The press
” ”
key to start setting of recording interval. Use
or
keys to select the desired recording interval for measured
values.
2.4 RAIN SEASON SETTING
Press
”
”
button the third time to enter
“RAIN SEASON
SETTING
”
display.
Press” ”
button to start setting of the month of rain season.
Press
or
buttons to select the month from January to December.
Rain season is the time of year when most of a region
’
s average annual
rainfall occu rs. Rain season influence the annual rainfall maximum,
minimum and total value. When one month was selected, the annual
rainfall and annual max/min rainfall were
zero clearing
at 0:00 of the first
day of the selected month.
2.5 PRESSURE SETTING
Press
”
”
button the fourth time to enter
“
BAROMETRIC
SETTING”
display. Press the
” ”
button to enter BAROMETRIC HISTORY display,
