6
section (insert batteries in the Display Console firstly, Outdoor Sensor
secondly).
Attention:
⚫
Do not mix old and new batteries
⚫
Do not use Rechargeable batteries.
⚫
Use Lithium batteries for sensor array when outdoor temperature is
lower than 0 degrees Celsius
⚫
Ensure batteries are installed correctly with their po/-
1. Outdoor Sensor Set Up
1. Wind Vane
2. Wind Speed Sensor
3. UV sensor/ Light sensor
4. Solar panel
5. Rain collector
6. Thermo-hygro sensor
7. Bubble level
8. U-Bolt
9. LED Indicator: light on for 4s if the unit power up. Then the LED
will flash once every 16 seconds (the sensor transmission update
period).