74
Problem
Solution
solution may be as simple as
powering down
and up the console
.
1.
Make sure you have fresh batteries in the
display console.
2.
With the sensor array and console 10 feet
away from each other, remove the batteries
from the display console and wait 10
seconds. Put the batteries back in.
3.
Do not touch any buttons for several
minutes.
4.
The remote sensor search icon
will
splash on the display. Wait several
minutes for this icon to turn off.
5.
If the search icon turns off and the outdoor
temperature and humidity are still showing
dashes (--), the remote sensor is defective.
If the sensor properly syncs up, proceed to
the next
step “How to prevent intermittent
wireless communication”
How to prevent intermittent wireless
communication issues:
1. Install a fresh set of batteries in the remote
sensor array and console. For cold weather
environments, install lithium batteries.
2. The maximum line of sight communication
range is 300’ but most users will get 100’ or
less due to environmental conditions.
Move the sensor and remote closer
together.
3. If the sensor assembly is too close (less
