75
Problem
Solution
than 5’), move the sensor assembly away
from the display console.
4. Make sure the remote sensors are not
transmitting through solid metal like
aluminum siding (acts as an RF shield), or
earth barrier (down a hill).
5. Move the display console around electrical
noise generating devices, such as
computers, TVs and other wireless
transmitters or receivers.
6. Move the remote sensor to a higher
location. Move the remote sensor to a
closer location.
Temperature sensor
reads too high in
the day time.
Make sure the thermo-hygrometer is mounted in
a shaded area on the north facing wall.
Indoor and Outdoor
Temperature do not
agree
1. Allow up to one hour for the sensors to
stabilize due to signal filtering. The indoor
and outdoor temperature sensors should
agree within 4 °F (the sensor accuracy is ±
2 °F).
2. Perform a temperature calibration
(reference Section 2.1)
Indoor and Outdoor
Humidity do not
agree
1. Allow up to one hour for the sensors to
stabilize due to signal filtering. The indoor
and outdoor humidity sensors should agree
within 10 % (the sensor accuracy is ± 5 %)
2. Perform a humidity calibration (reference
Section 2.1)
Relative pressure
does not agree with
official reporting
1. You may be viewing the relative pressure,
not the absolute pressure.
2. Make sure you properly calibrate the
