10
Figure 7 Figure 8
Note:
If no LED light up or is lighted permanently, make sure the
battery is inserted the correct way or a proper reset is happened. Do
not install the batteries backwards. You can permanently damage
the outdoor sensor
Note: We recommend lithium batteries for cold weather climates, but
alkaline batteries are sufficient for most climates. R
echargeable
batteries should never be used at all because they have lower voltages.
1.5. Mount outdoor sensor
Reference 9&10. The mounting assembly includes two U-Bolts and a
bracket that tightens around a 1 to 2” diameter pole (included) using the
four U-Bolt nuts.
Use the bubble level beside the rain sensor as a guide to verify that
sensors are level.
1.6 Reset Button and Transmitter LED
In the event the sensor array is not transmitting, reset the sensor
array.
Figure 9
Figure 10
