23
2. Setting Mode
In normal mode, press SET key for 2 seconds to enter the setting mode.
Then press
”
”
button to transfer among different setting function :
⚫
TIME SETTING
⚫
UNIT SETTING
⚫
RECORD SAVE INTERVAL
⚫
RAIN SEASON SETTING
⚫
BAROMETRIC SETTING
⚫
KEY BEEP SETTING
⚫
CALIBRATION SETTING
⚫
TRANSMITTER ID
When the desired setting function is displayed, press the
” ”
key to
enter the sub-setting menu. Change a setting with the key
/
.Hold the
or
key for 2 seconds will increase/decrease digits
in great steps. Press HISTORY key or wait for 30 seconds at any time,
device will return to normal mode.
2.1 TIME SETTING
After entering setting mode, the first setting function
“
TIME SETTING
”
will appear on message panel. Use the
” ”
key to enter the following
sub-setting:
1) TIME FORMAT: 12H/24H
2) DATE
FORMAT:
MM-DD-YYYY
/
DD-MM-YYYY
/
YYYY-MM-DD select
3) TIME: Manual setting of time and date
4) TIME ZONE
5) DAYLIGHT SAVING TIME: switch on/off the reception of DST.
6) NORTH/SOUTH: Set northern/southern hemisphere for moon
phase
