12
Press the [ RESET ] key on the indoor or 7-in-1 outdoor wireless
sensor.
SYNCHRONIZING ADDITIONAL WIRELESS SENSOR(S)
(OPTIONAL)
The console can support up to 7 additional wireless sensors.
Press the [ SENSOR / WI-FI ] key on the console once to enter the
synchronization mode.
Press the [ RESET ] key on the new sensor and wait a few minutes.
NOTE:
- The channel number of the indoor sensor must not be duplicated
between the sensors.
- This console can support different types of additional wireless
sensors, e.g. soil moisture and
Pool sensor. If you want to couple additional sensors, please ask
your dealer for
more details.
POINT THE WIRELESS 7-IN-1 SENSOR SOUTH
The 7-IN-1 outdoor sensor is calibrated to face north for maximum
accuracy. Whatever the case,
for the convenience of the user (e.g. users in the southern
hemisphere), it is possible to orient the sensor towards the south
(display of the wind vane towards the south)
1. install the 7-IN-1 outdoor sensor so that the end of the wind meter
faces south.
Select "S" in the Hemisphere section of the Setup UI Setup page.
Press the Apply icon to confirm and exit.
NOTE:
If you change the Hemisphere setting, the direction of the moon
phase is automatically switched on.
CREATE WEATHER SERVER ACCOUNT & SET UP WI-FI
CONNECTION
The console can upload weather data (outdoor data only) to
WUnderground and/or Weathercloud via WI-FI.
NOTE:
