19
IMPORTANT NOTE:
- Please do not disconnect the power during the firmware update
process.
- Please make sure that the WI-FI connection of your PC/Mac is
stable.
- When the update process starts, do not operate the PC / Mac or
console until the update is complete.
- During the firmware update, the console will stop uploading data to
the cloud server. The connection is restored. If the console is unable
to connect to your router, please go to the SETUP page to run the
setup again.
- After the firmware update, If the setup information is missing,
please re-enter the setup information.
- Firmware update processes have a potential risk that cannot
guarantee 100% success. If the update fails, please repeat the
above step to update again.
OTHER CONSOLE SETTINGS AND FUNCTIONS
MANUAL SETTING OF THE CLOCK
This console is designed to determine UTC time by synchronising
with the assigned Internet time server. If you want to use it offline,
you can set the time and date manually.
Press and hold the [ SENSOR / WI-FI ] key for 6 seconds, and
return the console to normal mode.
In normal mode, press and hold the [ CLOCK SET ] key for 2
seconds to display the setting.
2. the setting sequence: DST AUTO/OFF Hour Minute Second
Second 12/24 Hour Format Year Month Day M-D/D/D-M Format
Time Synchronization ON/OFF Weekday Language.
Press the arrow keys to change the value. Press and hold the quick
setting keys.
