minutes.
2.
under normal display mode, hold the “Channel” key for 3 seconds to clear out the channel information
3.
If there is no effective signal with same ID code received for the current channel in one hour, the temperature of that CH
will shows “---“, the temperature display will resume back when the correct signal is received again
6.7 AIR PRESSURE FUNCTION
1.
The range of air pressure: 800mb ~ 1100mb
2.
After power on, hold UP for 3 seconds into the pressure testing status. There is useless to press any key. Reset it for
returning the normal status. When into pressure testing, there is BI sound. The unit is hPa/mb.
3.
At normal status, hold UP for 3 seconds to switch the pressure unit mb, Hpa/inHg. (switch C/F at the same time).
4.
Trend indication of air pressure. Air pressure record of last 12 hours.
6.8 RCC receiving
1.
Entering RCC receiving status:
1)
The clock will enter RCC receiving status automatically 10 minutes after the start-up or reset;
2)
Press and hold DOWN button for 2 seconds to enter manual RCC receiving status;
3)
The clock automatically receives RCC signals every day.
2.
Time of automatic RCC signal receiving: 2:03 a.m., 3:03 a.m., 4:03 a.m. and 5:03 a.m..
If the reception is successful, it will not enter the receiving again that day. RCC receiving time is 10 minutes.
3.
Display during receiving:
1)
When the clock enters RCC receiving status, a tower-shaped symbol on the LCD will flash.
2)
When the clock is receiving the signals, the tower-shaped symbol and a curved antenna symbol of RCC will flash.
3)
After receiving the synchronization signal, RCC symbol fully displays and exits the receiving status automatically.
4.
During receiving, press and hold DOWN button for 3 seconds, the clock will exit receiving manually.
5.
When the clock fails to synchronize, it will attempt to receive the radio-signal at 2:03 a.m. the next day.
6.
If the alarm sounds when the clock is receiving RCC signals, the clock will exit receiving and turns to alarm.
7.
When the RCC symbol fully displays, it will be off after time is reset manually.
Summary of Contents for WS50
Page 1: ...Froggit WS50 User manual...
