Adjust the pump output with the Up/Down-buttons
.
P
ress the Enter-button once to start the fogging process. The machine now produces fog
until the Enter-button is pressed again. The output can be changed during the fogging
process.
Press Mode again to standard menu.
7.4
Operating with firebase SG-RM-XLR remote and 0-10V (+) DC
Connect the
SG-1300 or SG-1300-CASED
to the
SG-RM-XLR remote
using the 3pin XLR socket
at the back of the machine.
The knob on the cable remote will control the level of the pump. Pressing the On/Off switch at the
cable remote starts the fog process.
