Operating the System | 4
B1510622_en | Operating instructions Firewood boiler S4 Turbo
45
4.6.10 Change room temperature (heating circuit with room temperature sensor)
r
Tap information display of the desired heating circuit
r
Tap “+” or “-” to adjust the desired room temperature
NOTICE! If this selection is not configured in the information display in the basic
display, open the components in the system menu.
4.6.11 Switch heating circuit mode
Tap the mode icon in the menu of the respective heating circuit in order to change the
mode.
Procedure
Icon
Description
OFF
The heating circuit is switched off. Frost
protection remains active!
Auto
The heating circuit is controlled according
to the set time program.
Party
The heating circuit is regulated before the
start of the next heating time.
To cancel this function prematurely,
activate another mode/function.
Setback mode The heating circuit is regulated to the set
setback temperature until the start of the
next heating time.
To cancel this function prematurely,
activate another mode/function.
Extra heating
The heating circuit is regulated to the set
room temperature with no time limitation.
To cancel this function prematurely,
activate another mode/function.
Continuous
setback mode
The heating circuit is regulated to the set
setback temperature until activation of
another mode/function.
