16
P359mane.fm
10.2 Cleaning
Clean tension- and sealing parts from strap
abrasion regularly using compressed air.
For that are additional openings existent in the
base plate.
Do not use any mechanical tool for cleaning.
When cleaning the surface of the tool do not use
water or aggressive solvents!
11 SERVICE
Servicing and repair work must only be carried out by authorized service centres.
If the tool breaks down or does no longer operate do not disassemble it. Send it fully assembled to the local
service center (see name and address on the rear page of this manual). Use original packing.
The pneumatic plastic strapping tool P359 is a high performance tool. We strongly recommend you to have it
serviced by an authorized service shop after 12 months at the latest if used one shift per day. If used two or
more shifts per day the tool has to be serviced after a shorter period of time.
12 WARRANTY CONDITIONS AND LIABILITY
FROMM Holding AG warrants all its strapping tools and machine heads during a period of 24 months from the
date of installation at the end-user's sight by the distributor, however, not later than 30 months from the date of
shipment to the distributor of FROMM Holding AG.
The warranty includes all deficiencies clearly resulting from poor manufacturing or faulty materials. Damage
claims as a result of production shutdowns and claims for damage to persons and to property resulting from
warranty deficiencies cannot be asserted by the customer.
The warranty excludes:
•
wearing parts (tensioning wheels, cutters, punches, dies, notching knifes, grippers and motors),
•
deficiencies resulting from improper installing, incorrect handling and maintaining the tool,
•
deficiencies resulting from using the tool without or with defective security- and safety devices,
•
disregard of directions in the operation manual,
•
arbitrary modifications of the tool,
•
deficient control of wearing parts,
•
deficient repair works of the tool.
•
Use of consumable products not recommended by FROMM Holding AG.
We reserve the right to modify the product at any time in order to improve its quality.
