4
P359mane.fm
2
TECHNICAL DATA
Description of the tool
The tool model P359 has been designed to strap packages with plastic strapping. The plastic strapping is fed
around the package manually or in combination with a strap feeder. The straps are inserted in the tool,
tensioned, sealed by friction welding and separated from the strap coil.
Tool size
without suspension bracket
with suspension bracket
Length:
372 mm / 14.7"
446 mm / 17.6"
Width:
176 mm / 6.9"
176 mm / 6.9"
Height:
146 mm / 5.7"
239 mm / 9.4"
Weight:
8.2 kg / 18.1 lbs
8.9 kg / 19.6 lbs
Sound information
The A-weighted equivalent continuous sound level at the work place of the machine operator is
typical 82 dB (A). The sound power level is 90 dB (A).
Deviation K: 3 dB
These values were determined according to EN ISO 11204 / EN ISO 3744.
Wear ear protection!
Vibration information
The weighted effective value of the acceleration typically amounts to 1.0 m/s
2
.
Deviation K: 0.5 m/s
2
This value was determined according to DIN EN 20 643.
Strap material
Strap qualities:
PET (Polyester) plain or embossed.
The plastic strap must be according to DIN EN 13394.
Use only plastic straps recommended by your sales shop (name and
address on the rear of the operation manual).
Strap dimensions:
19.0 - 32.0 mm / 3/4" - 1 1/4" x 0.6 - 1.53 mm / .023" - .060" (see chart of types).
Use only plastic straps with the correct strap dimensions for your tool.
Operation mode
Manual or Semi-Automatic mode
Strap tension
Tensioning force*:
Adjustable from 2000 - 3500 N / 450 - 787 lbs resp.
4000 - 7000 N / 900 - 1575 lbs at 6 bar / 87 psi (see chart of types).
Tensioning speed*:
120 mm/s / 4.7" per second with steady air pressure of 6 bar/87 psi resp.
60 mm/s / 2.4" per second with steady air pressure of 6 bar/87 psi (see chart of
types).
Seal
Type of seal:
Friction weld sealing
Strength of seal*:
Up to approx 75% of strap tensile strength
* The value depends on the strap quality.
