60
Values displayed
in the NOW, TO-
DAY, YEAR and
TOTAL menu
items
Values displayed in the NOW menu item:
Values displayed in the TODAY, YEAR and TOTAL menu items:
(for the current day, during the current calendar year and since the inverter was used for
the first time)
Output power (W)
Three-phase grid voltage (V)
Three-phase output current (A)
Grid frequency (Hz)
PV array voltage (V)
PV array current (A)
Ambient temperature (°C)
Fan speed (rpm)
Time
Time on the inverter or in the Fronius Solar Net ring
Date
Date on the inverter or in the Fronius Solar Net ring
Energy fed in (kWh, MWh)
Energy fed into the grid over the period in question
There may be discrepancies with values displayed on other measuring instruments be-
cause of differences in measuring methods. As far as calculating the energy fed in is con-
cerned, the only binding display values are those produced by the calibrated measuring
device provided by the electricity supply company.
Yield
Amount of money earned during the period in question (currency can be selected in the
setup menu)
Like the energy supplied figure, the yield figure may also exhibit discrepancies with other
measured values.
The 'Setup menu' section explains how to select a currency and charge rate.
The factory setting depends on the respective country setup.
CO2 savings (g / kg) in
CO
2
emissions saved during the period in question
The value for CO
2
savings depends on the power station facilities and corresponds to the
CO
2
emissions that would be released when generating the same amount of energy. The
factory setting is 0.53 kg / kWh (source: DGS – Deutsche Gesellschaft für Sonnenenergie
e.V. (German Society for Solar Energy)
Maximum output power (kW)
Largest amount of power fed into the grid during the period in question
Maximum three-phase grid voltage (V)
Highest grid voltage measured during the period in question
Maximum PV array voltage (V)
Highest solar module voltage measured during the period in question
Operating hours
Length of time the inverter has been working (HH:MM).
IMPORTANT!
A prerequisite for the correct display of day and year values is that the time
is set correctly.
