2
Software version 2.80.1 (power source) and upwards is needed to run the VR 2000
wirefeeder.
The VR 2000 was specially developed for use in shipyards and in the offshore industry.
The wirefeed is suited for use with all commercial protective gases.
Fig.1
Shipyard VR 2000 wirefeeder
The VR 2000 wirefeeder can be used in conjunction with all power sources
-
of the TransSynergic 4000 / 5000 series,
-
of the TransPuls Synergic 4000 / 5000 series,
-
of the TransPuls Synergic 2700 Duo series,
-
of the TransPuls Synergic 2700 Duo TIG series
General remarks
Machine concept
System
requirements
Area of
utilizationt
The VR 2000 is designed to be used with
wirespools of diameter 200 mm (7.87 in).
In conjunction with the 200 mm (7.87 in)
diameter wirespool, a 2-roller drive is
used. This results in a compact housing
and very low weight.
It also runs perfectly even when used with
very long hosepacks.
To facilitate the use of 70 m (229.66 ft.
7.91 in.) hosepacks, the VR 2000 has an
integrated gasflow regulator with a flow-
rate indicator.
