Fronius WF 25i REEL R /SA/2R/G/W, Operating Instructions Manual

The device is intended solely for the welding processes specified on the rating plate.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.

Proper use includes:
-

carefully reading and following all the instructions given in the operating instructions

-

studying and obeying all safety and danger notices carefully

-

performing all stipulated inspection and maintenance work.

Never use the device for the following purposes:
-

Thawing out pipes

-

Charging batteries

-

Starting engines

The device is designed for use in industry and the workshop. The manufacturer accepts
no responsibility for any damage caused through use in a domestic setting.

The manufacturer likewise accepts no liability for inadequate or incorrect results.

Environmental
conditions

Operation or storage of the device outside the stipulated area will be deemed as not in
accordance with the intended purpose. The manufacturer shall not be held liable for any
damage arising from such usage.

Ambient temperature range:
-

during operation: -10 °C to + 40 °C (14 °F to 104 °F)

-

during transport and storage: -20 °C to +55 °C (-4 °F to 131 °F)

Relative humidity:
-

up to 50% at 40 °C (104 °F)

-

up to 90% at 20 °C (68 °F)

The surrounding air must be free from dust, acids, corrosive gases or substances, etc.
Can be used at altitudes of up to 2000 m (6561 ft. 8.16 in.)

Obligations of the
operator

The operator must only allow persons to work with the device who:
-

are familiar with the fundamental instructions regarding safety at work and accident
prevention and have been instructed in how to use the device

-

have read and understood these operating instructions, especially the section
"safety rules", and have confirmed as much with their signatures

-

are trained to produce the required results.

Checks must be carried out at regular intervals to ensure that operators are working in a
safety-conscious manner.

Obligations of
personnel

Before using the device, all persons instructed to do so undertake:
-

to observe the basic instructions regarding safety at work and accident prevention

-

to read these operating instructions, especially the "Safety rules" section and sign to
confirm that they have understood them and will follow them.

Before leaving the workplace, ensure that people or property cannot come to any harm
in your absence.

Mains connection

Devices with a higher rating may affect the energy quality of the mains due to their cur-
rent consumption.

6